Version 3
Features
- possible voltages from 3.3 to 1.2 with 0.05 step
- set required voltage at NR Options
- do not need external power
- by default power is off
- after reading power is off
- can make automatic test of all voltages for best ECC map. example:
------------
Test Voltage
------------
3.3 Green 1070 Red 136 Grey 352 Time 140
3.25 Green 1072 Red 134 Grey 352 Time 141
3.2 Green 1068 Red 138 Grey 352 Time 156
3.15 Green 1070 Red 136 Grey 352 Time 157
3.1 Green 1060 Red 146 Grey 352 Time 156
3.05 Green 1066 Red 140 Grey 352 Time 156
3.0 Green 1072 Red 134 Grey 352 Time 172
2.95 Green 1070 Red 136 Grey 352 Time 141
2.9 Green 1052 Red 154 Grey 352 Time 141
2.85 Green 1056 Red 150 Grey 352 Time 140
2.8 Green 1054 Red 152 Grey 352 Time 172
2.75 Green 1052 Red 154 Grey 352 Time 157
2.7 Green 1054 Red 152 Grey 352 Time 156
2.65 Green 1056 Red 150 Grey 352 Time 141
2.6 Green 1052 Red 154 Grey 352 Time 125
2.55 Green 1050 Red 156 Grey 352 Time 156
2.5 Green 1028 Red 178 Grey 352 Time 156
2.45 Green 1022 Red 184 Grey 352 Time 156
2.4 Green 1008 Red 198 Grey 352 Time 156
2.35 Green 1004 Red 202 Grey 352 Time 141
2.3 Green 1012 Red 194 Grey 352 Time 172
2.25 Green 1014 Red 192 Grey 352 Time 157
2.2 Green 1042 Red 164 Grey 352 Time 140
2.15 Green 1082 Red 124 Grey 352 Time 141
2.1 Green 1136 Red 70 Grey 352 Time 141
2.05 Green 1190 Red 16 Grey 352 Time 141
2.0 Green 1206 Red 0 Grey 352 Time 110
1.95 Green 1206 Red 0 Grey 352 Time 109
1.9 Green 1206 Red 0 Grey 352 Time 125
1.85 Green 1166 Red 40 Grey 352 Time 171
1.8 Green 596 Red 610 Grey 352 Time 219
Best value: 1.95
Version 1, 2
Jumper
In -+ External power. Connect wires here
1.8 ..
3.3 ..
In ..
1.8 xx power = 1.8v
3.3 ..
In ..
1.8 ..
3.3 xx power = 3.3v
Power up sequence with external power
1. Connect USB cable
2. Power up external voltage generator
Power down in reverse order
Installation
External power clip
|
