| Author |
Message |
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
 Posted: Mon Nov 12, 2007 17:14 Post subject: Hynix
|
|
Hi i'm new to this, so bare with me 
I got this Hynix nand chip: HY27UT088G2M and it's not in my Cfg list...what to use instead?
Regards
Bosse
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Mon Nov 12, 2007 17:41 Post subject:
|
|
Set in properties Bank = 2
Read_ID
Show result
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Mon Nov 12, 2007 18:09 Post subject:
|
|
Hi,
I have now tryed that...didn't work.
Maby I have done it wrong? Here is how I did:
Put the chip in, right click on Nand flash reader, choose properties, changed it to Bank 2, closed with the okey marker, right clicked on nand flash reader, and Read ID.
Just got an error says: Cancelld, Media error, can't open for read file...see picture.
How to proceed?
Regards
Bosse
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Mon Nov 12, 2007 18:49 Post subject:
|
|
Set any config file.
For example, K9K4G08
and repeat
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Mon Nov 12, 2007 19:28 Post subject:
|
|
Hi,
So now I got this:
00 00 00 00 error on Bank 2
AD D3 14 A5 if I set it on Bank 1
Bosse
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Mon Nov 12, 2007 19:51 Post subject:
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Mon Nov 12, 2007 21:40 Post subject:
|
|
I now read it, and I got 1.03 Gb in a dump.
I've tryed to search for FAT 16 and 32 no luck, so I inverted the file and did a new search but no luck.
Any suggestions what to do next?
I can also mention that I also tryed to read it with the HY27UT084G.cfg, and then I only got a 528 .Mb file.
The original size of it is 2 Gb.
I will also try to uplad a 300k file, for you to check.
Regards
Bosse
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Mon Nov 12, 2007 23:18 Post subject:
|
|
Strange!
88G2 mean 8Gbit = 1Gbyte
How many flash chips?
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Mon Nov 12, 2007 23:46 Post subject:
|
|
Just one chip.
When I got the dump of it, how shall I continue...as it didn't work with the FAT search both original and inverted.
Bosse
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Tue Nov 13, 2007 0:32 Post subject:
|
|
Try search dirs: [.][.][space][space][space][space]
half dirs: [.][space][space][space][space]
FAT table: F8FFFF/h/528/0
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Tue Nov 13, 2007 15:37 Post subject:
|
|
Hi Sergei,
Now I found the FAT :-)
I've been looking how to proceed in the manuals in the program, but have not found out how...could you please give me a direction to go.
Regards/ Bosse
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Tue Nov 13, 2007 16:52 Post subject:
|
|
Very Good!
Manuals:
English / Search
Block_Number / English / "All topics"
What controller name?
Put 300k from FAT on FTP
|
|
|
Bosse
Joined: 12 Nov 2007
Posts: 85
Location: Sweden
|
|
Posted: Tue Nov 13, 2007 18:20 Post subject:
|
|
Hi,
The columms contain 01, 02, 03, 04, 05, 06....so it's not mixed.
How to continue with this.
Regards/ Bosse
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Tue Nov 13, 2007 18:50 Post subject:
|
|
Dump_Search / Listing
Set Block_Size = 0x4200
Press "Show"
Copy Log to text file.
Put on ftp
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Tue Nov 13, 2007 21:39 Post subject:
|
|
Try
Block_Number / 0000
Block_Size = 0x42000
Marker = 524
Send me Log
|
|
|
|
