[Сергей]

INDILINX
IDX110M00-LC
POH739.00
ILAAD12008
128 GB
16 - K9HCG08U1M
32 - dumps

[Jenya_T]

INDILINX
IDX110M00
128 GB
16 - K9HCG08U
32 - dumps

Mix Editor
Join by Byte

Block Pair 0x108000, 8448

Block_Size 0x0x4200

использовал транслятор во всех ИМС по кускам

[Jenya_T]

INDILINX
IDX110M00
60 GB
16 - K9LBG08U
16 - dumps (4GB)

Mix Editor
Join by Byte

Block Pair 0x108000, 8448

Block_Size 0x0x4200

Данные восстановлены.

[SBS_RDM]

Device: OCZ Tech. 2"5 250GB SSD SATA II

Controller: INDILINX
IDX110M00

IC's: 16 - 29F128G08CJABA
32 - dumps (4GB)

Chip config is attached (Chip.txt).

Model: IDX110M00 2c 88 05 c6 16x2
Assembler: IDX110M00
Layout IDX110M00 540 Xor 2c 88 05 c6

Steps:

Input 0/2/1/3/4/6/5/7/8/10/9/11/12/14/13/15/16/18/17/19/20/22/21/23/24/26/25/27/28/30/29/31

Join by Byte
01_01 - 02_01
01_02 - 02_02
03_01 - 04_01
03_02 - 04_02
05_01 - 06_01
05_02 - 06_02
...
15_01 - 16_01
15_02 - 16_02

Block Pair 0x200000, 0x2000
Join by Dump 16

Assembler: IDX110M00
Assembler properties : Scan block 0x400000
Data block 0x2000
Save image.
It's all.

P.S. Don't forget to switch on an ECC before assembler.

Огромное спасибо Сергею и Владу за необходимую помощь при сборке данного девайса.

[vsd]

OCZ Vertex 30 GB

16 - K9GAG08U0M
16 - Dump

INPUT
Order: 0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16

Job
Model:
Layout: IDX110M00 528
Assembler: IDX110M00
Steps: 4
Props: 59
----------------------------------------
Input 0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15
Join by Byte 2, false
Block Pair 0x100000, 0x2000
Join by Dump 16
----------------------------------------
Scan Block: 0x200000
Data Block: 0x4000

Correction: 0

MBR
FS: 0x7
Start: 0xc38200

Data recovered but due to huge amount of errors, data corrupted (even with ECC on)

[aj2008]

OCZ Vertex 120GB

IDX110M00-LC

Model
IDX110M00 ec d7 55 b6 16x2

Layout
IDX110M00 528

Assembler
IDX110M00

Mix
Input 0/2/1/3/4/6/5/7/8/10/9/11/12/14/13/15/16/18/17/19/20/22/21/23/24/26/25/27/28/30/29/31
Join by Byte 2
Block Pair 0x100000 , 0x2000
Join by Dump 16

IDX110M00
Scan Block 0x200000

Some errors in reading. After assembly some corrupt data. Most data recovered

[aj2008]

OCZ Vertex 30GB

Indilinx IDX110M00-LC

16 x K9GAG08U0M
16 x Dumps

Chips read as here -> http://forum.soft-center.ru/viewtopic.php?t=2818

Layout
IDX110M00 528

Assembler
IDX110M00

Mix
Input 12/13/0/1/8/9/4/5/14/15/2/3/10/11/6/7
Join by Byte 2 , false
Block Pair 0x100000 , 0x2000
Join by Dump 8

IDX110M00
Scan Block 0x200000
Data Block 0x4000


Save Image. Many read errors and result is not great, many files corrupted.

[Женя]

OCZ Colossus 3.5" 120GB Internal RAID0
2xIndilinx IDX110M00-LC
32xK9LBG08U0M (4224)
32xDumps

Order of chips(see on pictures):
Chip1,2,3,4,5,6,7,8,25,26,27,28,29,30,31,32 - Disk1
Chip9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24 - Disk2

With each disk:
Layout
IDX110M00 528
Mix
Input
Order 0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15
Join by Byte
Parts 2
Data false
Block Pair
Block 0x100000
Page 0x2000
Join by Dump
Parts 8
Assembler
IDX110M00
Scan Block 0x200000
Data Block 0x4000

We have two disk images and we need to join by page them with page 0x2000(8192).
Order Disk1/Disk2
Get data.