Author |
Message |
Amarbir[CDR-Labs]
Joined: 01 Jan 2017
Posts: 15
Location: Chandigarh [India]
|
Posted: Fri Dec 08, 2017 5:00 Post subject: Presales Questions - Some Adapters Not In Shop
|
|
Hello Sergey ,
As You Are Aware That i Have Been Communicating With You Regarding Purchase Of Hardware Of FE I Wanted To Ask a Few Presales Questions .I See That We Have Default TSOP48 Adapter On Reader , You Also Sell The TLGA , BGA And VGA Adapters Along With Monolith Board .The New Addition Is The Power Adapter .I Wanted To Ask Were Have The Following Adapters Vanished From Shop
1 : xD/Sd Card Adapter -> http://www.flash-extractor.com/manual/adapter_xd_sd/
2 : TSOP56 - > http://flash-extractor.com/manual/adapter_tsop_56/
PS : i Also Wanted To Ask That Do All Your Adapters Read Chips When Balls Are Removed Or You Have To Reball Them When Inserting In TLGA/BGA/VBGA Sockets .As i Have Seen Both Kind Or Adapters .
|
|
|
Сергей

Joined: 26 Aug 2005
Posts: 20282
Flash-Extractor developer
|
Posted: Fri Dec 08, 2017 16:20 Post subject: Re: Presales Questions - Some Adapters Not In Shop
|
|
Yes
They are not produced anymore
Amarbir[CDR-Labs] wrote: |
Do All Your Adapters Read Chips When Balls Are Removed Or You Have To Reball Them When Inserting In TLGA/BGA/VBGA Sockets .As i Have Seen Both Kind Or Adapters . |
Balls must be removed
Pads must cleaned from solder
|
|
|
Amarbir[CDR-Labs]
Joined: 01 Jan 2017
Posts: 15
Location: Chandigarh [India]
|
Posted: Fri Dec 08, 2017 20:26 Post subject:
|
|
Sir ,
The Card Adapter Was Promising .Cards With Bad Blocks of Memory Are Not Very Uncommon ,I See That Few Times a Months .I Would Be Placing a Order Soon Thank You .
|
|
|
|