Author |
Message |
Gord
Joined: 16 Apr 2010
Posts: 45
|
Posted: Mon Jun 05, 2017 18:02 Post subject: UNKNOWN CHIP FD32B08UCH1-49 TSOP-48 ID:ad 3a 18 03
|
|
Hello,
Has anyone come across this chip FD32B08UCH1-49 TSOP-48 ID:ad 3a 18 03
It's for a Kingston USB Key Model: DT101 64GB (CNTL:PS2251-07-V QTY:2 CHIPS FD32B08UCH1-49 ID:ad 3a 18 03
Thanks
|
|
|
HaQue
Joined: 16 Feb 2013
Posts: 473
Location: Adelaide, Australia
|
Posted: Mon Jun 05, 2017 19:32 Post subject:
|
|
Hi,
---Are you 100% sure of ID? 03 as 4th byte is suspect in my opinion. Does chip ID ok in NR? make sure pins are cleaned well.--- EDIT- I think this is wrong, sorry. looks like 2CE, single channel TLC.
Is this 2 chips with 2 banks each? It is likely Hynix relabelled as Kingston.
if correct ID, see if Sergey can create Config through skype.
|
|
|
Gord
Joined: 16 Apr 2010
Posts: 45
|
Posted: Mon Jun 05, 2017 20:14 Post subject:
|
|
Hi
thanks for reply, yes id's ok as 03. I was think same should be a3 maybe. cleaned both chip and both id 03 funny. may ask Sergey to make config.
Thanks
|
|
|
ZBZTS
Joined: 23 May 2016
Posts: 24
|
Posted: Thu Jul 13, 2017 9:27 Post subject:
|
|
I also have a master for the PS2251-07 chip, ID is ad 3a 18 03, not found in the database ,the software detects the chip ID is also the same, sure is the correct ID
|
|
|
Giroot
Joined: 05 Apr 2017
Posts: 10
|
Posted: Fri May 25, 2018 2:07 Post subject:
|
|
ZBZTS wrote: | I also have a master for the PS2251-07 chip, ID is ad 3a 18 03, not found in the database ,the software detects the chip ID is also the same, sure is the correct ID |
What voltage for this chip? 3.3v? 1.8v? 1.0v?
Did you adjust the voltage for this chip?
I have the same chip, but I can't get the ID.
Thanks.
|
|
|
|