| Author |
Message |
mickeymouse
Joined: 12 Oct 2016
Posts: 3
|
 Posted: Wed Oct 12, 2016 17:16 Post subject: Corsair Voyager GT 2GB
|
|
Hi,
I have Corsair Voyager GT 2GB, with 2 x Samsung K9K8G08U0A PCB0 and SM324QF BC. It just stopped responding any way. System does not see any USB device connected. LED does not light, dmesg on Ubuntu does not notify any device connection. After disassembling I found that crystal oscillator is not working but internal voltage regulators of SM324QF seems to work.
I read a little in the Internet and I'm think that I need to replace SM324QF BC ... it seems possible. And then I need to configure it using Silicon Motion software. But, if I understood properly, I need proper configuration data for my type of flash drive. Does anybody on the forum have these data?  Am I right? Should the flash drive get back to life after such operation?
Regards,
Mickey
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Thu Oct 13, 2016 11:30 Post subject:
|
|
May be it will work
But data will be erased
May be replace crystal oscillator?
|
|
|
mickeymouse
Joined: 12 Oct 2016
Posts: 3
|
|
Posted: Thu Oct 13, 2016 18:33 Post subject:
|
|
| Сергей wrote: | | May be replace crystal oscillator? |
I've tried. I've tried also to connect external generator. Without success 
|
|
|
mickeymouse
Joined: 12 Oct 2016
Posts: 3
|
|
Posted: Mon Jan 09, 2017 13:28 Post subject:
|
|
|
After over 2 months of waiting I've received the package with SM324QF BC from China. The chip was replaced in my Voyager ... and it works now. No any additional configuration was required, which surprised me. All data are ok.
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Tue Jan 10, 2017 2:18 Post subject:
|
|
|
|
