|
|
|
|
|
|
|
|
23.09.2023 - tech support stopped
23.09.2024 - forum closed
 |
|
| Author |
Message |
pcimage
Joined: 03 Mar 2008
Posts: 1768
Location: UK
|
 Posted: Wed Mar 26, 2008 22:07 Post subject: UP10 UTO724 Controller with 2x HY27UTO88G2M
|
|
Struggling with this one, did the last UP10 controller OK.
2 Dumps (only one bank found in each chip)
Find FAT16 in 1st dump @ 0x179f4000
Find 00 ...02 ...04 ...06... in FAT of 1st dump, in consecutive sectors
Find 01 ...03 ...05 ... 07 in same place in 2nd dump, consecutive again
So, I think join by 528, right?
Block size I find to be 0x108000
Use Block Number 1001 with Marker 514/515 and get..
Show Blocks
-----------
Bank 00
0x0000 - 0x03f3 = 1012
Bank 01
0x0000 - 0x03bb = 956
Bank 02
0x0000 - 0x0000 = 1 <<< look here
0x029e - 0x029e = 1
Find Bank Space
---------------
Bank 01 Start 0x03ff Size 0x3ff -> 0x400 OK
Find Bank Size
--------------
00 / 0x000 / 0x3f3
01 / 0x000 / 0x3bb
Make disk.image, but not folders/data 
I'm going to try and upload the 1.dump and 2.dump to the container, see if you can tell me where I've gone wrong.
Thanks
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Wed Mar 26, 2008 23:03 Post subject:
|
|
MBR, FAT, FAT1, FAT2 green or red?
Root on place?
|
|
|
pcimage
Joined: 03 Mar 2008
Posts: 1768
Location: UK
|
|
Posted: Wed Mar 26, 2008 23:14 Post subject:
|
|
MBR and FAT are green, but folders are complete garbage.
Raw scan find nothing good, some headers but no real data.
|
|
|
Сергей
Joined: 26 Aug 2005
Posts: 20281
Flash-Extractor developer
|
|
Posted: Wed Mar 26, 2008 23:21 Post subject:
|
|
| | | |