[Сергей]

Legs for NR made by 3D printer

Photos sent by customer

It helps mount / unmount screws only with hands, without special tools

[Сергей]

File for 3d-printer

[arvika]

Thanks!

[bkmgtpe]

PrusaPrinters has another style leg with a cutout to glue the nut. They are hexagonal and a bit easier to tighten. The designer gave tribute to the originator of this topic.

https://www.prusaprinters.org/prints/108891-nand-reader-legs-m25-nut-leg-tightening-tool

[xvlivx]

Hello.
Share with you the last version of Leg-Nut object to print in 3D and same case for a "H" caddie to fit easy BGA132 chips on BGA152 chip adapter.
I used a resin 3D printer due higher resolution, better for this small pieces versus filament 3D printers. I found you don't need crazy glue for solder pieces or attach components like nuts in "Legs for NR", you can use the same resin applied with a fine brush then expose to UV light, as you do masking for soldering. The photo-curable resin and has great compatibility like adhesive with other plastics like ABS, PVC, and PET.
I hope this could be useful.

[Сергей]

Also can use screws DIN 466, M2.5

Photo attached

But it is hard to find them in shops
I search for them 4 years
Only now can buy

Attention: do not use force

[HelpDisc]

just arrived from China