Flash Extractor
© Soft-Center
About     Shop     Downloads     Manual     Library     Forum     Services     Contacts
[-] CBM2090, 1x ad dc 84 25, bank space unknown   Search  Register  Log in
This topic is locked: you cannot edit posts or make replies.
Author Message
_tk_



Joined: 18 Oct 2010
Posts: 26
Location: Dresden (Germany)

PostPosted: Sat Feb 23, 2019 20:48    Post subject: [-] CBM2090, 1x ad dc 84 25, bank space unknown
Reply with quote

Hi gents,

I have an old USB stick (update: "bluemedia" 1GB), where I can't get the right bank space.
Could you please explain, how to do that?

Many thanks in advance!

Thomas

--------
details:

Controller:
CBM2090

Memory chip: 1x Samsung K9G8G08U1M
(Memory ID is 0xad dc 84 25; Samsung should have 0xec d3 14 a5, but params are the same.)
----------
// Chip
Company Samsung
Name K9G8G08U1M
ID code ad dc 84 25

// Structure
Bus 8
Banks 1 x 1 GB
Page 2112 /4 = 528 = 512+16 -> ok.
Block 0x0
Blocks 0x0

-------
Model
Layout
CBM2090 528
Mix
Input
Order 0
Assembler
Block Number

Block Size 0x40000
Bank Space 0x240/(0x200)*7 (?)
Image Cut

Banks 00 / 0x000 / 0x176
01 / 0x000 / 0x17e
02 / 0x000 / 0x17d
03 / 0x000 / 0x17e
04 / 0x000 / 0x176
05 / 0x000 / 0x17e
06 / 0x000 / 0x17d
07 / 0x000 / 0x17e

Correction

Mix

Scan Offset 0
Scan Back false
Scan Max 0
Сергей



Joined: 26 Aug 2005
Posts: 16915

Flash-Extractor developer

PostPosted: Mon Feb 25, 2019 21:54    Post subject:
Reply with quote

http://www.flash-extractor.com/manual/common_errors/

This chip have 2 banks
_tk_



Joined: 18 Oct 2010
Posts: 26
Location: Dresden (Germany)

PostPosted: Wed Feb 27, 2019 0:36    Post subject:
Reply with quote

Hmm... Crying or Very sad
Thanks for your clear statement.
Please give me a little time to read the chip again - I sent it back to my client.
Сергей



Joined: 26 Aug 2005
Posts: 16915

Flash-Extractor developer

PostPosted: Wed Feb 27, 2019 5:26    Post subject:
Reply with quote

No problem

Say when ready
_tk_



Joined: 18 Oct 2010
Posts: 26
Location: Dresden (Germany)

PostPosted: Sun Mar 03, 2019 13:33    Post subject:
Reply with quote

I checked again the stick. It's an 1 GB "bluemedia" device, please find the image in the 1st post.
So the bank number should be correct.
Сергей



Joined: 26 Aug 2005
Posts: 16915

Flash-Extractor developer

PostPosted: Sun Mar 03, 2019 16:50    Post subject:
Reply with quote

U1M have 2 banks

* dc is 512 MB per bank

2 x 512 MB = 1 GB



Open fresh NAND Reader software
Do not select config
Press ID
Make screenshoot
_tk_



Joined: 18 Oct 2010
Posts: 26
Location: Dresden (Germany)

PostPosted: Sun Mar 03, 2019 22:58    Post subject:
Reply with quote

Please give me some more days, the chip is still at my customer.
Сергей



Joined: 26 Aug 2005
Posts: 16915

Flash-Extractor developer

PostPosted: Wed Mar 06, 2019 1:19    Post subject:
Reply with quote

My message last to mark topic answered
_tk_



Joined: 18 Oct 2010
Posts: 26
Location: Dresden (Germany)

PostPosted: Tue Mar 12, 2019 16:23    Post subject:
Reply with quote

Dear Sergey,

I received the chip today.
Please find attached a NAND Reader screenshot.

I confirm, it's a
SAMSUNG
K9G8G08U1M
chip, with only one bank, and signature 0x ad dc 84 25.
I tried it with 3.3V, and also 2.3V. Same result.
Сергей



Joined: 26 Aug 2005
Posts: 16915

Flash-Extractor developer

PostPosted: Tue Mar 12, 2019 20:18    Post subject:
Reply with quote

This is problem with connection

Please, remove power adapter

Check that all solder is removed from chip pins
Move your finger ober the pins at bottom side
They must not be sharp, they must be smooth

Pay attentoin to pin_10
http://www.flash-extractor.com/manual/adapter_tsop_48/
_tk_



Joined: 18 Oct 2010
Posts: 26
Location: Dresden (Germany)

PostPosted: Tue Mar 12, 2019 23:22    Post subject:
Reply with quote

I tried it again and again, also with PC3k reader - no change (except bank 1 is 512MB, not 1GB).
All pins are perfectly clean. I used a sharp knife and a glass-fibre brush for cleaning, as usual. No joint pins.
So I 'm sure, that Bank 2 is dead.

Please close this case. Thanks for your strong support!
Display posts from previous:   
This topic is locked: you cannot edit posts or make replies. All times are GMT + 4 Hours
Page 1 of 1

 

Last added
SM3255TS Q AC   98 d7 98 b2   1x1 20-82-00369-1   45 4c 95 93   4x1 PS8035-0   98 3a a8 92   2x1 SM3257EN L -AA   98 de 98 92   1x1 IS917   98 3a 94 93   2x1 Monolith USB SM3257   ad 3a 18 03   1x1 TC90535   98 3a 94 93   1x1 IS917   89 a4 64 32   2x1 THGBM4G6D2HBAIR   98 d7 94 32   1x2 PS2251-01-M   98 de 94 82   1x1
News
20.04.2018 Sector Number Slow
17.03.2018 Adapter BGA-272
22.02.2018 Bad Bytes Editor
18.10.2017 Power adapter
07.10.2016 Conatiner v9
Other products
© Soft-Center ltd.