Flash Extractor
© Soft-Center
About     Shop     Downloads     Manual     Library     Forum     Services     Contacts
Power adapter   Search  Register  Log in
Reply to topic
Author Message
Сергей



Joined: 26 Aug 2005
Posts: 15771

Flash-Extractor developer

PostPosted: Wed Oct 18, 2017 3:42    Post subject: Power adapter
Reply with quote



http://www.flash-extractor.com/manual/power_adapter/
jason



Joined: 18 Aug 2010
Posts: 65


PostPosted: Sun Oct 22, 2017 20:05    Post subject: Re: Power adapter
Reply with quote

Can be introduced under its role and scope of application?
Сергей



Joined: 26 Aug 2005
Posts: 15771

Flash-Extractor developer

PostPosted: Sun Oct 22, 2017 23:11    Post subject:
Reply with quote

Reader works on 3.3v
It is imporssible to read with it memory that works on 1.8v

This adapter make level translation (bridge) to selected voltage

Example of 1.8v chip
http://www.flash-extractor.com/forum/viewtopic.php?t=9573
Сергей



Joined: 26 Aug 2005
Posts: 15771

Flash-Extractor developer

PostPosted: Wed Oct 25, 2017 11:08    Post subject:
Reply with quote

Got perfect result with 2.4v
http://www.flash-extractor.com/forum/viewtopic.php?t=9860
armadillo



Joined: 19 Jan 2009
Posts: 845
Location: Germany

PostPosted: Fri Nov 03, 2017 1:37    Post subject:
Reply with quote

I had a first success with your power adapter. I have a BGA152 chip ID ec de a4 32 with 8 banks. The ECC was very bad but with 1.8 volts the ECC was almost perfect.
HDDRCVR



Joined: 29 Sep 2015
Posts: 265


PostPosted: Mon Nov 20, 2017 18:37    Post subject:
Reply with quote

the adapter works great
jimb



Joined: 18 Apr 2012
Posts: 41
Location: Japan

PostPosted: Mon Dec 04, 2017 4:33    Post subject:
Reply with quote

Does the adapter work without external power?
Or does the adapter require an external power supply?

What voltage does the adapter need if using external power?

Thanks,
jimb.
Сергей



Joined: 26 Aug 2005
Posts: 15771

Flash-Extractor developer

PostPosted: Mon Dec 04, 2017 8:18    Post subject:
Reply with quote

jimb wrote:
Does the adapter work without external power?
Or does the adapter require an external power supply?

Power Adapter can provide 3.3, 1.8v
Also you can use external voltage source

jimb wrote:
What voltage does the adapter need if using external power?

I do not understand question
jimb



Joined: 18 Apr 2012
Posts: 41
Location: Japan

PostPosted: Wed Dec 06, 2017 5:09    Post subject:
Reply with quote

Сергей wrote:

Power Adapter can provide 3.3, 1.8v
Also you can use external voltage source

OK. Thank you for the reply.

jimb wrote:
What voltage does the adapter need if using external power?

Сергей wrote:
I do not understand question

Sorry for not being clear. If an external voltage source had been required, then I wondered to what value I should set the external voltage source.

But now I understand an external voltage source is optional.
If I use an external source one, then I should slowly increase the external voltage up from 1.8v until I get a good read.

jimb.
Сергей



Joined: 26 Aug 2005
Posts: 15771

Flash-Extractor developer

PostPosted: Wed Dec 06, 2017 8:47    Post subject:
Reply with quote

jimb wrote:
But now I understand an external voltage source is optional.
If I use an external source one, then I should slowly increase the external voltage up from 1.8v until I get a good read.


Yes
External voltage range is 1.8 ... 3.3v

People report good results with 2.4v
Display posts from previous:   
Reply to topic All times are GMT + 4 Hours
Page 1 of 1

 

Last added
JMF670H   89 64 64 3c   8x1 IS903   2c 84 64 54   1x4 PS2251-67-5   98 3a a8 92   2x2 PS2251-68-5   98 3a 94 93   1x1 Monolith Micro SD_1   2c 64 44 4b   1x4 82-00263-1   45 ce 99 b2   1x1 TC58NC6623G6F   98 de 94 93   1x1   v2 Monolith SD_5   98 3a a4 93   1x2 PS3110-S10C-12   98 3a 94 93   2x4 Monolith USB_29   45 4c a8 a2   1x1
News
18.10.2017 Power adapter
07.10.2016 Conatiner v9
07.09.2016 VT / Auto - new mode
27.07.2016 CR2 files support
10.04.2016 Processor Cores
Other products
© Soft-Center ltd.