[jeremyb]

I’ve developed a few techniques for recovering INDILINX controllers by hand. I can typically get perfect (1:1) or near perfect recoveries. I use a different method than soft-center so the results are different.

Requirements:
1. The PCB must be functional (eg: no missing components, damaged traces, etc), ideally untouched, you can test by shorting the firmware jumper near the SATA connector, the drive should ID as YATADONG BAREFOOT. Offer does not apply if PCB is damaged.
2. If you removed the NAND chips, they MUST be attached to the PCB in the same order they were removed. Offer does not apply if we must figure out the correct order.
3. I can NOT do the job remotely, please don’t ask.


** Offer is Unaffiliated with Soft Center, please email jeremy@recovermyflashdrive.com and reference this offer for information **